Tutorials

Texas Gold Gun Cleaning Tutorial

(For this example we are cleaning a semi-automatic pistol.)

1. As always make sure your firearm is unloaded.

        Remove magazine.

        Make sure there is not a round in the chamber.

2. Disassemble Firearm

        Please refer to your gun manual for complete instructions.

3. Clean the Slide

        Liberally add a few drops of Texas Gold Gun Cleaner to the slide where you see carbon build up.

        This would be mostly by the firing pin assembly and the ejector but feel free to use Texas Gold Gun Cleaner on any parts with gunpowder or carbon residue.

        Using a brush scrub along the inside of the slide.    

        When finished use a patch until all surfaces are clean.

 4. Clean the Barrel

        Run a brush (that fits your caliber) through the barrel to loosen up any carbon build up.

        Add a few drops of Texas Gold Gun Cleaner to a patch and push it through the barrel back to front.

        Repeat this step until the final patch comes out clean.

        We do not want any residue in the barrel.

Now grab your Texas Gold Gun Lube (Sold separately).

    Add one to two drops on any surface that may experience friction.

        Any metal parts.

        Along the slide

Thank you for purchasing Access Gun's line of Texas Gold Gun products.